Smoke Density Tester

Shanta Engineering
Manufacturers of Smoke Density Tester
( As par ASTM D-2843 )

Density of smoke from the burning or Decomposition of plastics is measured.

This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics.

It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions.
Digital Electronic Photometer with a 0 to 100 % Absorbance Scale &Electronic Timer Provided

Address : 10, Anusaya, Opp. Mangala High School, Kopari, Thane (E) - 400603, Maharashtra, INDIA
Factory : Pomal Industrial Area, Next to Wellman Company, Near Bayer India, Dhokali - Kolshet Road, Thane (W) - 400607, Maharashtra, INDIA
Tel. : 022 - 25893581 / 32503771
Email : response@shantaengineering.com

Melt Flow Index Tester

International Equipments

Manufacturers of Melt Flow Index Tester




Melt Flow Index Tester

Melt Flow Index Tester as per ASTM D – 1238 to measure the flow rates of thermoplastics by extrusion plastometer. This test indicates the uniformity of the flow rate of the polymer.

Melt Flow Index Tester (KAYJAY/2006/AC)

Specification:
Temperature controller:Micro processor based PID controllerwith temperature range from ambientto 400ºC, resolution of 0.1ºC andaccuracy of + 0.1ºC.

Timer : Digital presettable with a rangeup to 59 minutes, 59 seconds.Sample cutting: Auto [Motorized]

Weights : 1.2 kg, 2.16 kg, 3.8 kg,5 kg & 21.6 kg.Accessories : Standard accessories*.Paint : Powder coated.Power : 230 Volts, 50 Hz, single phase.

DOWNLOAD CATALOGUE

Melt Flow Index Tester (KAYJAY/1994/L)

Specification:
Temperature controller : Micro processor basedPID controller with temperature range fromambient to 375ºC, resolution of 0.1ºC andaccuracy of + 0.1ºC.

Timer : Digital presettable with a range up to59 minutes, 59 seconds and having buzzer output.Sample cutting : Manual.

Weights: 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg.Accessories : Standard accessories*.Paint : Powder coated.Power : 230 Volts, 50 Hz, single phase.

DOWNLOAD CATALOGUE

Melt Flow Index Tester (KAYJAY/2005/CE)

Specification:
Temperature controller: Micro processor based auto tuned PID controller with temperature range from ambient to 400ºC, resolution of 0.1ºC and accuracy of + 0.1ºC.

Timer : Digital presettable with a range up to 999 seconds and having buzzer output.Sample cutting : Manual.

Weights : 2.16 kg & 5 kg.Accessories : Standard accessories*.Paint : Powder coated.Power : 230 Volts, 50 Hz, single phase.

for Details Please Visit International Equipments

Melt Flow Tester

Shanta Engineering

Manufacturer of Melt Flow Tester


Melt Flow Tester

This instrument measures the rate of extrusion of Molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position.

SPECIFICATION

Instrument with following accessories will be suppliedDigital stop watch, Temp. Controller ( PID ), Piston, Orifice remove,Barrel Cleaner, Orifice Cleaner,Scoop, combined weight of 2.16 Kgs.. and 5.0 Kgs.

1. Max. Temp. Ambient to 300°C
2. Resolution : 0.10°C, Accuracy : + 0.20°CTimer 0-99.9 min.

Other Products

Izod & Charpy Impact Tester Oxygen Index Tester Smoke Density Tester Environmental Stress Cracking Tester Electronic Universal Testing Machine VICAT / HDT Tester Kranti Briquetter

Request Quote