Universal Testing Machines Manufacturers

Friday, January 26, 2007

COMPUTERISED BRINELL HARDNESS TESTER

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer of Computerised Brinell Hardness Tester

Computerised Brinell Hardness Tester
Computerised Brinell Hardness Tester


FEATURES :

• Fully Computerised (PC Based) Brinell Hardness Tester.
• Direct and accurate measurement of Brinell Hardness Number using "State of Art" image processing technology.
• 'Wide testing range' : from soft metal such as lead up to medium hardened steels.
• High accuracy and repeatability of measurement at all loads.
• Faster measurement yielding to higher productivity.
• Hydraulic loading and unloading cycle.
• Advanced Window based software.

Latest GUI Features :

User friendly software with all help file and Window Features.
• Online indentation setting and focusing on PC monitor.
• Advance image processing : Algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen.

Batch file Processing :

Option for data/storage and reports generation.Statistical EvaluationSoftware foe calculating standard deviation, mode medium, histogram etc.

• Wide options in calibration mode.
• Extendibility for future advanced image processing analysis, requirements.

'FIE' Computerised Brinell Hardness Tester is a simpleand a accurate means to produce automatically measures the ball ondentation give Brinell hardness number.These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and their accurate results are widely acclaimed.These testers strictly confirm to IS : 2281, BS : 10003-2 and ASTM E-10

CONSTRUCTION :
The robust machine frame is designed to accommodate the high precision loading system and an optical device with CCD camera. Specimen is placed on a testing table. The test cycle is semi automatic. The accurate load is applied on a ball indentor by means of a lever and weights. After a specific lapse of time. The load is removed. The image is digitized using a CCD camera fitted on the optical device and is captured by the PC. The diameter if the indentation are directly measured by Pc to give the Brinell Hardness Number directly.

TECHNICAL DATA :

STANDARD ACCESSORIES :

Labels: , , , , , , ,

COMPUTERISED VICKERS HARDNESS TESTER

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer of Vickers Hardness Tester
Computerised Vickers Hardness Machine

Computerised Vickers Hardness Machine
VICKERS HARDNESS TESTER MODEL : VM - 50
• Built in projection screen to get accurate results.
• Tests Loads - 5, 10, 20, 30 & 50 kgf.
• Optional magnification - 70 X
• Scale Least count 0.001 mm.
FEATURES :
• Fully Computerised (PC Based) Vickers Hardness Machine.
• Direct and accurate measurement of Vickers Hardness Number using "State of Art" image processing technology.
• 'Wide testing range' : from soft metal such as lead up to medium hardened steels.
• High accuracy and repeatability of measurement at all loads.
• Faster measurement yielding to higher productivity.
• Small size of indentation makes it a non destructive testing on finished components.
• Motorised loading and unloading cycle.
• Small loads allow testing of thin sheet metals.
• Advanced Window 95/NT based software.
Latest GUI Features :
• User friendly software with all help file and Window Features.
• Online indentation setting and focusing on PC monitor.
• Advance image processing : Algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen.
Batch file Processing :
Option for data/storage and reports generation.
Statistical Evaluation :
Software foe calculating standard deviation, mode medium, histogram etc.
• Wide options in calibration mode.
-Calibration / Verification on PC monitor makes easietr to operate.

SPECIFICATIONS :

'FIE' Computerised Vickers Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002.

PC requirements

• Minimum Pentium-II with 64 Mb RAM
• Windows 98 Operating System. ( PC not included in standard scope of supply.)

CONSTRUCTION :
The robust machine frame is gesigned to accommodate the high precision loading.Specimen is placed on a festing table. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of a lever and weights. After a specific image is igitized using a CCD camera fitted on the indentation are automatically measured by PC to given the Vickers Hardness Number.

Labels: , , , , , , ,

Monday, January 22, 2007

Vickers Hardness Tester

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer of Vickers Hardness Tester
Vickers Hardness Tester
Vickers Hardness Tester

• Built in projection screen to get accurate results.
• Tests Loads - 5, 10, 20, 30 & 50 kgf.
• Optional magnification - 70 X
• Scale Least count 0.001 mm.

FEATURES :
• Testing range is very wide, from soft metal such as lead, upto the hardest, like hardened steel.
• Same hardness number is obtained on the same specimen, regardless of the load applied.
• The indentation is tiny and allows testing of aprecision finished part
• Loading and unloading cycle is motorised.
• Thin sheet metal is perfectly tested because the load applied is very small.
• Built-in projection screen to get accurate results.

'FIE' Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard and their accurate results are widely acclaimed. these strictly conform to IS : 1754 - 1968.

CONSTRUCTION :
The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen specimen is placed on a testing table. The test cycle is fully automatic the accurate load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse of time the load is removed automatically. The objectives is indexed with the test piece and the diamond indentation is projected on the measuring screen the diagonals of the indentation can be measured by means of the micrometer screw of the projection screen.

Labels: , , , , , , ,

Rockwell Hardness Testing Machine

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.


Manufacturer of Rockwell Hardness Testing Machine

Rockwell Hardness Testing Machine
Rockwell Hardness Testing Machine
MOTORISED ROCKWELL SYSTEM HARDNESS TESTER
MODEL : RASN ( M )
• Suitable for Rockwell Tests.
• Motorised for automatic Operation cycle i.e. load/dwell/unload.
• Preliminary Test Force - 98.07N (10kgf)
• Total Test Force - 588.4, 980.7, 1471N (60,100,150 kgf)
• Test Force Selection by external dialing• Auto zero setting dial gauge.
ROCKWELL SYSTEM HARDNESS TESTER
MODEL : RASN
• Suitable for Rockwell Tests.
• Manually Operated
• Preliminary Test Force - 98.07 N (10kgf)
• Additional Test Force - 490.3, 882.6, 1373N (50.90, 140 kgf)
• Total Test Force - 588.4, 980.7, 1471N (60,100,150 kgf)
• Test Force Selection by external dialing
• Auto zero setting dial gauge.Rockwell cum Brinell Tester, Model RASN (B)
• Same as RASN above in additional
• Additional Test Force - 1471, 2354N (177.5, 240 kgf)
• Total Test Force - 1839, 2452N (187.5, 360 kgf)
ROCKWELL CUM ROCKWELL SUPERFICIAL HARDNESS TESTER
MODEL : RASN ( T )
• Suitable for Rockwell & Rockwell Superficial Tests.
• Manually Operated
• Preliminary Test Force - 29.42, 98.07N (3,10kgf)
• Additional Test Force - 177.7, 264.8, 411.9, 490.3, 882.6, 1373N ( 12, 27, 42, 50, 90 & 140 kgf)
• Total Test Force - 147.1, 294.2, 441.3, 588.4, 980.7, 1471N (15, 30, 45, 60,100,150 kgf)
• Test Force Selection by external dialing
• Auto zero setting dial gauge.
MOTORISED DIGITAL HARDNESS TESTER
MODEL : RASN ( E )
• Digital Hardness Tester for Rockwell Tests, motorised for automatic operation cycle i.e. load/dwell/unload.
• Preliminary Test Force - 98.07N (10kgf)
• Total Test Force - 588.4, 980.7, 1471N (60,100,150 kgf)
• Test Force Selection by external dialing
• Set position with LED bar indicator for easy operation.
• Keyboard entry through reliable membrane switches for scale/GO-NOGO/Dwell time selection.
• Large size scale display for easy reading with 0.1 Rockwell Resolution.
• Parallel output for connecting dot matrix printer to get results indicating serial number of tests, hardness scale, hardness value and high / good / low indication.
'FIE' new 'RASN' series of Hardness Testing Machines come with much improved design and look with following major design changes.
1) The machine body is having a taper front look and a big size dial gauge in the front. The machine is powder coated for far better look. The paint shade do not fade and machine looks like new over year.
2) The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is returned for years together due to hardened bush.
3) A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
4) An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enable testing of small dia. pin or ball upto 3 mm dia.
5) All machine models are provided with automatic zero setting dial gauge or digital readout. Hence zero setting at every test is avoided.
6) All four models conform to respective standard as under.

Labels: , , , , , , , ,

Saturday, January 20, 2007

Impact Testing Machine

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer of Impact Testing Machine

Impact Testing Machine

Impact Testing Machine

General Description :

The pendulum Impact Tester Model IT 30 is designed for conducting izod, Charpy test. The test methods confirm to BS : 131 : part 4-1972 (amended 15 Aug. 1993)BSEN : 10045-2 : 1993 & ASTM : E-23-94a.

The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.

(It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for Izod., Charpy test, Changing from one striker to another is achieved simply by fixing the new striker into it's position.

for Details Please Visit fuelinstruments

Labels: , , , , , , , ,

Monday, January 15, 2007

Torsion Testing Machine

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.


Manufacturer and Suppliers of Torsion Testing Machine


Torsion Testing Machine








Torsion Testing Machine

Features :

Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by pendulum dyanometer system. Torque ranges can be adjusted by auto torque selector. Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist.

The accuracy of torque indication is + of the true torque

TECHNICAL DATA :

Machines upto 25000 Nm. capacity will be available on special enquiry FIE reserves the rights of change in above specification due to constant improvements in design.

Contact Details

Company Name : FUEL INSTRUMENTS & ENGINEERS PVT. LTD.
Address : Plot No. 68 to 89, Parvati Co-op. Industrial Estate Ltd., Yadrav ( Ichalkaranji ) - 416 145, Tal. Shirol, Dist. Kolhapur, Maharashtra, India.
Telephone : +91 - 2322 - 252137
Fax : +91 - 2322 - 252397
Email : response@fuelinstrument.com
 
 
for more details of Torsion Testing Machines and Material Testing Machines and Equipments visit

Material Testing Machines 
Material Testing Equipments

Labels: , , , ,

Sunday, January 14, 2007

LAMINATED SPRING TESTING MACHINE

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer of LAMINATED SPRING TESTING MACHINE

The FIE Spring Testing Machine, Models St and CST, incorporates design features to enable high accuracy testing with economy, speed and versatility

• Loading Accuracy as high as + 1%
• Four standard measuring ranges available with auto load-selector.
• Deflection is read directly on electronic Electronic Digital Display.
• Straining at variable speeds to suit a wide range of applications.
• Autographic recorder supplied as standard to enable study of behavior of springs
• Motorised drive for rapid adjustment of the height
• High reading accuracy due to large size of dial.
• Large effective test space enables testing of wide range of springs.
• Robust staining frame of an extremely rigid construction.
• Safe operation ensured be means of safety devices.
• Fully enclosed and protected pendulum.

Application :
FIE Laminated Spring Testing Machine is designed to test Laminated Springs and Coil Springs under compression and bending loads.

Principal of Operation :
Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.

Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.

Machine consists of :
Straining Unit
This consists of a "C" type rigid frame with hydraulic cylinder at its top and adjustable main testing tale is connected to an upper cross-head through two screwed columns can be rapidly adjusted to test height by means of motor. A pair of trolleys is provided on the table to take the horizontal deflection of the spring under loading.

Laminated springs are tested by placing them on trolleys provided on the table. Coil Springs are tested by placing them between the compression plates. Hardness test can also be conducted with a suitable attachment.

Control Panel :
The control Panel consists of a power pack complete with drive motor and an oil tank, control valve a pendulum dynamometer a load and deflection indicating system and an autographic recorder.

Power Pack :
The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.

Hydraulic Controls :
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation in the oil is infinitely variable. Incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of table movement.

Load and Deflection Indicator System :
The load Indicator System consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.

The deflection indicator system operates electronically and deflection is read directly on the digital display with least count of 0.1 mm. The encoder is mechanically coupled to the main hydraulic ram for getting signal of deflection.

Pendulum Dynamometer :
This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with special damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.

Autographic Elongation Recorder :
This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ratio of either 1:1 or 1:2.

Accuracy & Calibration :
AII FIE Laminated Spring Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : 1964


FIE Spring Testing Machines comply with Grade "A" of BS : 1610 : 1964 and Grade 1.0 of IS 1828 : 1975 An accuracy of + 1.0% is guaranteed from 20% of the load range selectedto full load.

Helical Coil Spring Testing Machine Model CST :
FIE's range also includes Helical Coil Spring Testing Machine, Model CST for testing coil springs under compression loads. the principle of operation, details on control panel, except deflection indicator system, accuracy and calibration are the same as the laminated Spring Testing Machine. Model ST described alongside. The straining unit is designed for coil Springs. It consists of a Hydraulic Cylinder and a table coupled with the ram of the hydraulic cylinder mounted on a robust base. The cylinder and the ram are individually lapped to eliminated friction. The cross-head is connected to two screwed columns and is driven by a motor for rapid adjustment of test height.

SPECIFICATION :

Installation :
It is recommended that machines be erected on a foundation. Details on foundation can be given on request
more details :
http://www.manufacturersdealersexporters.3seo.com/Material-Testing-Machine/Surface-Roughness-Testers/
-----------------------------------
other Blogs Related to LAMINATED SPRING TESTING MACHINE
Hardness Testers
Universal Tensile Testing Machine
Digital Rockwell Hardness Testers
Rockwell Hardness Tester,
Rockwell Hardness Testing Machines
Calibration Testers
Surface Roughness Testers
Digital Non Destructive Testers
Electronic Non Destructive Testers
Hand held Non Destructive Testers
Vibration Testers
Roughness Testers
Portable Hardness Testers
Rockwell Hardness Testing Machines
Charpy Impact Testers
Izod Impact Testers
Mould Hardness Tester
Core Hardness Tester
Friction Testers
Hardness Testing Machines
Hardness Testers
Bursting Strength Tester
Material Testing & Dynamic Balancing
Material Testing Machines
Dynamic Hardness Tester
Smoke Density Tester
Analogue Hydrostatic Pressure Testing Equipment
PLC based Computerised Hydrostatic Pressure Testing Equipment
Digital Hot Air Oven
Computerised Humidity chamber
Digital Opacity Tester
Dart Impact Tester
Analogue VSP / HDT apparatus
Computerised VSP / HDT Apparatus
Motorized Notch Cutter
Izod Impact Tester
Analogue Izod / Charpy Impact Tester
Computerised Izod Impact Tester
Computerised Charpy Impact Tester
Melt Flow Index Tester
Melt Flow Tester
Dynamic Balancing Machines
Dynamic Balancing Machine
Rockwell Hardness Testing Machines
COMPUTERISED BRINELL HARDNESS TESTER
COMPUTERISED VICKERS HARDNESS TESTER
Vickers Hardness Tester
Rockwell Hardness Testing Machine
Impact Testing Machine
Torsion Testing Machine
LAMINATED SPRING TESTING MACHINE
Erichsen Testing Machine
Compression Testing Machine
Universal Testing Machines

Labels: , , , ,

Friday, January 05, 2007

Erichsen Testing Machine

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer and Suppliers of ERICHSEN TESTING MACHINE

Fie Erichsen tester is designed to carry out Erichsen Cupping test on metals. Quick clamping and manual operation facilitates faster and trouble free working of the machine.

Installation :

It is recommended that the machine is mounted on a rigid table.FIE reserve rights of change in the above specification due to constant improvement design. The dimensions given above are all approximate.

For Details Click Here Visit : http://www.fietest.com/
--------------------------------------
Check other Products Manufacturers and Suppliers Blogs

Hardness Testers

Universal Tensile Testing Machine

Digital Rockwell Hardness Testers

Rockwell Hardness Tester, Rockwell Hardness Testing Machines

Calibration Testers

Surface Roughness Testers

Digital Non Destructive Testers

Electronic Non Destructive Testers

Hand held Non Destructive Testers

Vibration Testers

Roughness Testers

Portable Hardness Testers

Rockwell Hardness Testing Machines

Charpy Impact Testers

Izod Impact Testers

Mould Hardness Tester

Core Hardness Tester

Friction Testers

Hardness Testing Machines

Hardness Testers

Bursting Strength Tester

Material Testing & Dynamic Balancing

Material Testing Machines

Dynamic Hardness Tester

Smoke Density Tester

Analogue Hydrostatic Pressure Testing Equipment

PLC based Computerised Hydrostatic Pressure Testing Equipment

Digital Hot Air Oven

Computerised Humidity chamber

Digital Opacity Tester

Dart Impact Tester

Analogue VSP / HDT apparatus

Computerised VSP / HDT Apparatus

Motorized Notch Cutter

Izod Impact Tester

Analogue Izod / Charpy Impact Tester

Computerised Izod Impact Tester

Computerised Charpy Impact Tester

Melt Flow Index Tester

Melt Flow Tester

Dynamic Balancing Machines

Dynamic Balancing Machine

Rockwell Hardness Testing Machines

COMPUTERISED BRINELL HARDNESS TESTER

COMPUTERISED VICKERS HARDNESS TESTER

Vickers Hardness Tester

Rockwell Hardness Testing Machine

Impact Testing Machine

Torsion Testing Machine

LAMINATED SPRING TESTING MACHINE

Erichsen Testing Machine

Compression Testing Machine

Universal Testing Machines

Labels: , , , ,

Compression Testing Machine

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturers and Suppliers of Compression Testing Machine

FEATURES :


The FIE Compression Testing Machine Incorporates design features to enable high accuracy testing with economy, speed & versatility.

• Loading Accuracy as high as + 1%

• Straining at variable speeds to suit a wide range of materials.

• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials

• Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.

• High reading accuracy due to large size and design of dial.

• Wide range of standard and special accessories, including load stabilizer.

• Large effective clearance between columns enables testing of standards specimens as well as structures.

• Simple controls for easy of operation.

• Robust staining frame of an extremely rigid construction.

• Safe operation ensured be means of safety devices.

Application :

FIE Compression Testing Machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal of Operation :

Operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The piston of the dynamometer is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.

Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.

Machine consists of : Straining Unit

This consists of a hydraulic cylinder and a table coupled with the ram of hydraulic cylinder, mounted on robust base. The cylinder and the ram are individually lapped to eliminate friction. The cross-head is connected to two screwed columns and is driven by a motor, for rapid adjustment of test height.


An elongation scale with a minimum graduation of 1.0 mm, is provided to measure the deformation of the specimen.

Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.


Control Panel :

The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.

Power Pack :

The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.

Hydraulic Controls :

Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of table movement.

Load Indicator System :

This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.

Pendulum Dynamometer :

This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.

Autographic Continuous Roll Load-Elongation Recorder :

This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy & Calibration :

AII FIE Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

Special Accessories :

These include load stabilizer, Brinell test Attachment, Bend Test Attachment, Shear Test Attachment anda wide range accessories offered on request at additional cost.

Installation :

It is recommended that machines be erected on a foundation. Details on foundation can be given on request

SPECIFICATION :

Feedback Form

Labels: , , , ,

Thursday, January 04, 2007

Manufacturers of Universal Testing Machines and Hardness Tester

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturers and Suppliers of Universal Testing Machines and Hardness Tester


FIE from the Inception in 1953 Stands as Example to Various Industries about how to Grow Efficiently in Adverse Condition also. Till date more than 38000 Machines Installed through out the World.


The quality standards of these machines are comparative to any similar machines of leading manufacturers of the world. The major population of the machines exists in countries like U.S.A., Canada, U.K., Germany, Italy, Belgium, USSR, Japan, Australia and Middle East. Numerous awards are to the credit to FIE for the excellence.

All the activities are backed by modern infra-structure are highly qualified & experienced staff.

An advanced stage Research force was formed to assist the activities of FIE & the surrounding industries in the form of FIE Research Institute in 1979.

The main objectives are...

Extension of knowledge in the field of natural and applied sciences. Conducting experiment with a view to develop new raw materials, processes, components, equipments & machines which are mainly import substitution. Improvisation in the exiting materials, processes and machines.

Encouragement to the activities of the surrounding industries.

Products Manufacturing

A) Universal Testing Machine

1) Mechanical Type
2) Electronic Type

B) Electro-Mechanical Universal Testing Machines

1) Model Unitek 9400 Series
2) Model Unitek 9700 Series

C) Electro-Mechanical PC Control Universal Testing Machine

1) Unitek 9500 Series

D) Compression Testing Machine

E) Erichsen Testing Machine

F) Laminated Spring Testing Machine

G) Torsion Testing Machine

H) Impact Testing Machine

I) Hardness Testing Machine

1) Rockwell Hardness Testing Machine
2) Vickers Hardness Tester [Model VM-50]
3) Computerised Hardness Tester [Model : VM 50 PC]
4) Computerised Brinell Hardness Tester [Model : B3000 PC]
5) Computerised Brinell Image Analysis System [B.I.A.S]
6) Computerised Brinell Hardness Testing Machine
7) Portable Hardness Tester [ Model - PR 1]


J) SAROJ make Rockwell Hardness Testing Machine

1) SAROJ make Brinell Hardness Testing Machine
2) Brinell Hardness Tester Model B 3000 [O]
3) Brinell Hardness Tester Model B 3000 [H]

K) Dynamic Balancing Machine

1) Model HDM
2) Model HDCM
3) Model HDVM & HDVTM

Feedback Form

Contact : Plot No. 68 to 89,Parvati Co-op. Industrial Estate Ltd., Yadrav - 416 145. Tal. Shirol, Dist. Kolhapur. Maharashtra, India
Telephone : +91-2322-252133,252136,252137

Fax : +91 - 2322 - 252397

Email : response@fuelinstrument.com

======================================

INTERNATIONAL EQUIPMENTS

A NAME TO BE RECKONED....... with Quality & Development

Manufacturers and Suppliers of Material Testing Equipments in India

In the seventies decade, when people were not even aware of material testing equipment he pioneered the indigenous Melt Flow Index Tester in India.

Meticulously working over minute details with stringent quality tests he continue to strive for perfection and attain the calibre of developing products as per the International standards.

Under the proficient leadership of Mr. Manish k. Doshi, ' International Equipments ' is at its acme and one of the voluminous name in the field of material testing. With his head office & manufacturing unit at Mumbai, he export to more than 30 countries, with a setup of 5000 laboratories in India & abroad. there wide range comprises of more than 50 equipment availing them to plastic, rubber, electronic, textile, packaging, pharmaceutical, engineering, automobile & aerospace industry. Winning accolades all over, he continue to surge ahead of time & exceed customer expectations.

COMPANY'S MISSION

Leadership in material & component testing, sustaining highest quality standard and providing the customers with advanced technology & testing solutions.

Products Manufactured :


* Melt Flow Index * MFI Tester * Melt Flow Index Tester

* Melt Indexer * UTM * Universal Testing Machine

* Tensile Testing Machine * Tensile Tester

* Tensile Testing Equipment * Humidity Chamber

* Environmental Chamber * Hydraulic Press * Sample Cutting Press

* Dart Impact Tester * COF Tester * Friction Tester

* Coefficient of Friction Tester * E.S.C.R Apparatus

* Environmental Stress Cracking Resistance Apparatus

* Vicat Softening Point Apparatus

* Heat Deflection Test Apparatus * VSP Apparatus

* HDT Apparatus * Izod Impact Tester Notch Cutter

* Opacity Tester * Carbon Content Apparatus

* Carbon Black Content Apparatus

* Hydrostatic Pressure * Tester Pressure Testing for Pipes

* Pressure Testing Equipment for Pipe

* Pipe Testing Equipment Impact Tester for pipe

* Pipe Impact Tester * Zero Degree Chamber

* Conditioning Chamber

* Carbon Dispersion Tester * Muffle Furnace Furnace

* Bond Tester Peel Tester * Oven Hot Air Oven

* Material Testing Machine * Material Testing Equipment

* Plastic Testing Machine * Plastic Testing Equipment

Feedback Form

Contact : 35, Crescent Industrial Estate, Kanjurmarg (E), Mumbai - 400042, India.

Telephone : +91 - 22 - 25789133 / 34, 25786635.

Fax : +91 - 22 - 25785185.

Email : response@internationalequipments.com

Labels: , , ,