Smoke Density Tester

Shanta Engineering
Manufacturers of Smoke Density Tester
( As par ASTM D-2843 )

Density of smoke from the burning or Decomposition of plastics is measured.

This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics.

It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions.
Digital Electronic Photometer with a 0 to 100 % Absorbance Scale &Electronic Timer Provided

Address : 10, Anusaya, Opp. Mangala High School, Kopari, Thane (E) - 400603, Maharashtra, INDIA
Factory : Pomal Industrial Area, Next to Wellman Company, Near Bayer India, Dhokali - Kolshet Road, Thane (W) - 400607, Maharashtra, INDIA
Tel. : 022 - 25893581 / 32503771
Email : response@shantaengineering.com

Dart Impact Tester

International Equipments

Manufacturers of Dart Impact Tester



Dart Impact Tester

as per ASTM D – 1709 and IS 2508 to test impact resistance of plastic film by free falling dart method.

Specification:

Dart : 2 nos.

Weights : A set of weights ranging from 5 grams to 500 grams would be supplied for incremental loads.

Release mechanism : Electromagnetic.

Vacuum creation : Single stage oil vacuum pump.

Paint : Powder coated.

Power : 230 Volts, 50 Hz, single phase.

for Details Please Visit International Equipments

Izod Impact Tester

Shanta Engineering

Manufacturer of Izod Impact Tester


Izod Impact Tester

AS PER ASTM D-256

The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing. The energy absorbed per unit of specimen width is reported in joules.

SPECIFICATION :

Fully digital display ( LCD ) of angle and energy in joules

Range change by selector switch

Interchangeability of impact hammers are very easy.

Max. Available energy - 21.68 Joules

Ranges - 0-2.71 J 0-5.42 J 0-10.84 J 0-21.68 J


OPTIONAL :

1. Dimension feeding facility to calculate Joules / cm2 or Joules / m

2. Torque wrench

3. Charpy hammers

4. Notch cutter ( Manual )

5. Notch cutter ( Motorised )

For More Details Please Visit Shantaengineering

Analogue Izod / Charpy Impact Tester

International Equipments

Manufacturers of Analogue Izod / Charpy Impact Tester



Analogue Izod / Charpy Impact Tester

as per ASTM D - 256 to test impact resistance of plastics. The test indicates the energy required to break standard test specimen.

Specification:

Capacity : Up to 21.68 Joules.

Release angle of pendulum : 150 degree.

Range of four scales : 0-2.71 Joules, 0-5.42 Joules, 0-10.84 Joules and 0-21.68 Joules.

Minimum resolution on scale : 0.02 Joule, 0.05 Joule,0.1 Joule and 0.2 Joule respectively.

Paint : Powder coated.

DOWNLOAD CATALOGUE

for Details Please Visit International Equipments

Computerised Izod Impact Tester

International Equipments

Manufacturers of Computerised Izod Impact Tester


Computerised Izod Impact Tester

Computerised Izod / Charpy Impact Tester

as per ASTM D - 256 to test impact resistance of plastics. The test indicates the energy required to break standard test specimen.

Specification:

Capacity : Up to 25.00 Joules.Release angle of pendulum: 150 degree.

Range of four scales : 0-2.71 Joules, 0-5.42 Joules, 0-10.84 Joules, 0-21.68 Joules and 0-25.00 Joules.Minimum resolution on scale: 0.02 Joule, 0.05 Joule,0.1 Joule, 0.2 Joule and 0.2 Joule respectively.

Paint : Powder coated.

Power : 230 Volts, 50Hz, single phase.

Direct display through microcontroller: Impact strength in joules/meter and kg-cm/cm.

Graphic display and printout through PC: Impact energy Vs Angular displacement graph and numeric reports consisting of values for impact strength as per ASTM standard, ISO and IS standard in different units could be obtained by attaching a printer to the PC.

DOWNLOAD CATALOGUE

for Details Please Visit International Equipments

Computerised Charpy Impact Tester

International Equipments

Manufacturers of Computerised Charpy Impact Tester


Computerised Charpy Impact Tester


Computerised Izod / Charpy Impact Tester

as per ASTM D - 256 to test impact resistance of plastics. The test indicates the energy required to break standard test specimen.

Specification:

Capacity : Up to 25.00 Joules.Release angle of pendulum: 150 degree.

Range of four scales : 0-2.71 Joules, 0-5.42 Joules, 0-10.84 Joules, 0-21.68 Joules and 0-25.00 Joules.Minimum resolution on scale: 0.02 Joule, 0.05 Joule,0.1 Joule, 0.2 Joule and 0.2 Joule respectively.

Paint : Powder coated.

Power : 230 Volts, 50Hz, single phase.

Direct display through microcontroller: Impact strength in joules/meter and kg-cm/cm.

Graphic display and printout through PC: Impact energy Vs Angular displacement graph and numeric reports consisting of values for impact strength as per ASTM standard, ISO and IS standard in different units could be obtained by attaching a printer to the PC.

DOWNLOAD CATALOGUE

for Details Please Visit International Equipments

Impact Testing Machine

FUEL INSTRUMENTS & ENGINEERS PVT. LTD.

Manufacturer of Impact Testing Machine

Impact Testing Machine

General Description :

The pendulum Impact Tester Model IT 30 is designed for conducting izod, Charpy test. The test methods confirm to BS : 131 : part 4-1972 (amended 15 Aug. 1993)BSEN : 10045-2 : 1993 & ASTM : E-23-94a.

The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.

(It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for Izod., Charpy test, Changing from one striker to another is achieved simply by fixing the new striker into it's position.

for Details Please Visit fuelinstruments